Adndmc Mini Submersible Aquarium Heater – 25W 50W 100W 200W 300W Small Heater for Fish Tank 1-75 Gallon with LED Display
- Mini-size aquarium heater 25W with the controller, suitable for seawater and freshwater heating, betta fish and turtle tanks, and other small fish tanks or fish bowl 1-6 gallon.
- This fish tank heater is easy to use, 6Ft long cable wire, and the external controller can easily set the temperature, and the temperature adjustment range is 68-93℉.
- The controller of this heater has a Digital LED temperature display, which can display the real-time water temp and set temp so that you can know the temperature changes in the fish tank easily. There is also a clear heating indicator on it.
- This aquarium heater is made of thickened quartz glass and has a good sealing performance to prevent water from entering, making it a more fish-friendly heater.
- Comes with two suction cups, a bottom cover, and a sticker-thermometer.
Adndmc Mini size aquarium heater 25W with controller
Easy to use aquarium heater(3 steps):
1. Press the setting button, adjust to the desired temperature then stop.
2. The red indicator light is on, the heater starts to heat, and the controller displays the real-time water temperature.
3. When the heating is completed, the heating will stop automatically, and the green indicator light will be on.
- Voltage: 110-120V/60Hz
- Adjustment range: 68-93℉
- Material: Quartz glass tube filled with quartz sand
25W Recommended for:1-6 Gallon Tank:
- for: seawater and freshwater
- betta fish tank
- Turtle tanks
- Small fish bowl
Mizi Size heater
No more worrying about heating the mini fish tank, only 4.5 inches.
External temp controller
Red and green indicator lights and temperature display – easy to read.
Long cable wire
Easy to connect to sockets and install anywhere in the fish tank.
LED temperature display
The LED temperature display shows the real-time water temperature of the fish tank after the temperature setting is completed, and you don’t even need a thermometer anymore.
Memory
This heater has a power-off memory function, and it will automatically maintain the previous temperature setting when it is turned on again after a power failure.
Error is ±1℉
It is recommended to fully immerse the heater in water and install it obliquely in a place with good water circulation. Then the Heating error will be less than 1 degree Fahrenheit.
Package including Sticke-style thermometer*1/Bottom protective cover*1/Powerful suction cups*2.
